The Yanhua ACDP Module #40 is specifically designed to reset EWS (ISN) data on BMW 8HP transmissions across the E, F, and G series. This allows used 8HP EGS units to be cleared and reused, making it an essential tool for transmission repair and replacement.
This package includes Modules 11, 19, and 36, which are necessary for enabling full compatibility and functionality when working with different chipsets (SH725XX, TC275, and TC277) found in 8HP EGS units.
Important Note:
This is the hardware Module 40 only. The required A505 software license must be purchased separately to activate the functionality.
Key Features:
- Supports BMW 8HP EGS from E, F, and G chassis
- Bench mode reset for SH725XX, TC275, and TC277 chip types
- Allows clearing ISN data from used transmissions for reuse
- Compatible with ACDP-1 and ACDP-2 main units
- Includes Modules 11, 19, and 36 (required for operation)
Use Cases:
- Used 8HP transmission installation
- ISN mismatch repair
- EGS swap when original unit is unreadable or damaged
| Transmission Model | Chip Type | BMW Series | Support Status |
| 8HP E Series | SH725XX | E Chassis | ✅ Supported |
| 8HP F Series | TC275 | F Chassis | ✅ Supported |
| 8HP G Series | TC277 | G Chassis | ✅ Supported |
Please note that Modules 3, 8, 12, 15, 18, 19, 25, and 30 use a different interface board designed for the ACDP 1st generation. If you are using the ACDP 2nd generation, you will need to purchase these modules separately, as they are not compatible with the ACDP 2nd generation hardware. Additionally, ACDP 2 uses different PC software. Do not use the PC software intended for ACDP 1st generation with ACDP 2nd generation devices.
-
Item #:
295494
-
Product Type
Dongles and Accessories
-
SKU:
YH-40
