Accu-Readers

The LockTech LTKS KwikSet Decoder is a WIFI enabled digital scope that when used with a compatible IOS or Android Smartphone makes decoding these locks ridiculously easy and fast! Features:- Decodes all current SmartKey locks (GEN 1, 2, 3, & 4) and...

Honda Ignition Reset Tool by AccuReader LockTech’s LTHRT was designed to reset the spindle and plunger misalignment that occurs during the removal of the ignition cylinder on most 2012 and newer Honda ignition housings. During the removal of the ignition...

This tool was developed to remove the ignition in the “OFF” position in GM vehicles using the HU100 keyway. It will remove the ignition in the “OFF” position with no damage, no drilling, and do it in less than 90 seconds for super-fast key origination’s...

This tool was developed to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece.  It will remove the ignition in the “OFF” position with no damage, no drilling, and do it in less than 60...

Due to the increasing frequency of these ignitions failing this kit was put together to allow the locksmith to remove the ignition roll pin on most Honda and Acura models without drilling or any damage.  This kit is unique in that it grabs the outside of...

This pack includes 10 clamp tube sets to be used with Honda/Acura Ignition Roll Pin Removal Kit AR-LT-IRPR-KIT  

***NEW*** LockTech Kwikset Smartkey Decoder (LTKSD) 2.0 The LTKS 2.0 Decoder is our new and improved WIFI enabled digital scope. It features an onscreen battery level indicator, USB-C charging port, that when used with a compatible IOS or Android...

LockTech LTKSD REPLACEMENT KEY For KwikSet SmartKey Decoder (KEY ONLY)

AccuReader for Kawasaki KM12 Keyways This AccuReader was designed to read the KM12 ignitions found on many 2010+ Kawasaki motorcycles. This AccuReader will read actual depths for all 7 positions in ignitions and/or gas caps for a complete key...

HU100IRT-V3 Ignition Removal Tool was developed to remove the ignition in the “OFF” position in GM vehicles using the newer HU100 keyway that uses a removable tailpiece.   It will remove the ignition in the “OFF” position with no damage, no drilling,...

This system will allow you to read the Ford 8 cut locks from Huf, Non Huf, and Non-Sidebar Ignitions. Following a few simple steps it takes only minutes to read the depths for each cut in each position of a given lock. The AccuReader works on the process...

This version of AccuReader HU100IRT Ignition Removal Tool is designed to remove the ignition cylinders on 17+ Chevrolet Cruze.  The demonstration video can be found HERE