PRICE IS ONLY $645 For Mini Condor Owners VVDI BMW FEM/BDC Function : VVDI2 BMW FEM/BDC system (function released and available, just no user manual)
Users can refer to following information (3 steps for make keys: get key info >programming FEM/BDC system >make keys)
1. Support make new key with ignition switch (support add spare key and all key lost, all key lost require ISN)
2. Support reset FEM/BDC KM (cluster require reset manually)
3. Support erase key (after erase the key position become blank position)
4. Support backup coding
5. Support restore coding
Notes:
1. Backup coding and restore coding can direct operation generally.
2. Add keys, reset KM, erase key must programming FEM/BDC system first
3. In FEM/BDC interface, if 'get key info' the type not support, it will show: customer should use "BMW E sys software" program FEM/BDC system. Then programming FEM/BDC system with VVDI2 BMW
4. When operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5. Programming FEM/BDC system, require soldering and get eeprom. FEM 95128 chip, BDC 95256 chip usually there are 2 same chips on the module, please refer to the software diagram, select the correct one.
6. Programming FEM/BDC system, must restore the original eeprom, restore coding. If cannot restore coding or after restore coding assemble FEM/BDC module back to car, but with problem (such as the remote control cannot start the car or the car with window problem) please use "BMW E sys software" coding for FEM/BDC system
7. If connect power to FEM/BDC module, but the relay keep ringing, please contact technical support for help. Usually operation on FEM/BDC should be ok, just need to programming.
-
Product Type
Tokens
-
Item #:
156660
-
SKU:
NP-XH-VVDI2 FEM UPDATE
