PRICE IS ONLY $645 For Mini Condor Owners
VVDI BMW FEM/BDC Function :
VVDI2 BMW FEM/BDC system(function released and available, just no user manual)
Users can refer to following information (3 steps for make keys:get key info >programming FEM/BDC system >make keys)
1.support make new key with ignition switch(support add spare key and all key lost, all key lost require ISN)
2.support reset FEM/BDC KM(cluster require reset manually)
3.support erase key(after erase the key position become blank position)
4.support backup coding
5.support restore coding
Notes:
1.backup coding and restore coding can direct operation generally.
2.add keys, reset KM, erase key must programming FEM/BDC system first
3.in FEM/BDC interface, if 'get key info' the type not support, it will show:customer should use "BMW E sys software" program FEM/BDC system.
then programming FEM/BDC system with VVDI2 BMW
4.when operation on 'programming FEM/BDC system'interface,please don't close this software window until all procedures completed.
5.programming FEM/BDC system, require soldering and get eeprom.?FEM 95128 chip, BDC 95256 chip?usually there are 2 same chips on the module,
please refer to the software diagram, select the correct one.
6.programming FEM/BDC system,must restore the original eeprom, restore coding.if cannot restore coding or after restore coding assemble FEM/BDC module back to car,
but with problem(such as the remote control cannot start the car
or the car with window problem)please use "BMW E sys software" coding for FEM/BDC system
7.if connect power to FEM/BDC module, but the relay keep ringing,please contact technical support for help.usually operation on FEM/BDC should be ok,just need to programming.
-
Item #:
156660
-
SKU:
NP-XH-VVDI2 FEM UPDATE
