- By connecting the vehicle and diagnostic tool via OBDII, Godiag GT100+'s LED will indicate whether the OBDII diagnostic interface has good communication with the car.
- Monitor the voltage of the vehicle OBDII interface and display it in real - time. If it is less than 11V, please stop the diagnosis and programming to avoid the vehicle being unable to start/data loss/module locked.
Functions:
1). Used to check whether the diagnostic/programming/coding tool can send communication signals
2). ECU connection: single module connection, Godiag GT100+, connected to a single ECU module is convenient for a user to do the single-module diagnosis and programming
3). GT100+ program key for VW, Porsche, Mitsubishi, etc with all keys lost - activate the instrument or immobilizer module
A). To program VW 4th generation / 5th generation Lost all keys (for example new A6L Touareg A4 Q5 A7), please use GT100+ to short circuit banana connector PIN 16 --- PIN 1 to light up the dashboard, after that, use the key programmer tool to connect with the female adapter of GT100+ for data collection. Some vehicle dashboards won't be lit up, but data can also be collected, for example A6L Q7.
B). To replace the engine ECU of Toyota or to use some key programmer to program Toyota when all keys are lost, it needs to short-circuit PIN13-PIN4
C). To program the Mitsubishi key with all keys lost or to set OBDII when all remote key are lost, please short-circuit PIN1-PIN4
D). To program the Porsche Cayenne key with all keys lost or with all remotes lost, please short circuit PIN3-PIN7
4). Voltage and Current Value Display Function
- On the bench connect the ECU module by using the banana connector or db25 dedicated ECU interface, and Godiag GT100+ will display the voltage / current value. The user can intuitively see the current status of the ECU. If there is no current display or the actual displayed c