Ideal for towing companies looking to charge electric vehicles dead on the side of the road or mobile technicians needing consistent voltage power supply, using clean, renewable power - no fumes, no noise and no excessive costs. Simply flip the switch for silent, emissions-free portable power. The EV RESCUE 5k can also be used to complement or completely replace gas/diesel generators.
Manufactured & Made To Order In North America (4-6 week lead time)
Specifications:
Rated Output
Continuous output: 4,800W
Peak power (3 sec): 5,800W
AC Output
120 VAC pure sine wave (THD <3%)
60Hz, single phase, 40A Max continuous
Charging Ports
AC input: 2 x 125 VAC 20 Amp receptacle (NEMA 5-15P type)
Charging Times (0 to 90% SOC)
1x AC input (120VAC,1,200W): 5 hours
2x2 AC input (120VAC 2,400W): 2.5 hours
Combined input (AC + Solar): 1.5 hours
*Under optimal solar conditions
Box Mechanical Specs
Weight: 330 Ibs /150 kg
Four wheel (two stationary, two swivel) 5" neoprene casters
Dimensions of the unit inclu. handles (L x W x H): 32" x 24"x
30"/ 810mm x 600mm x 750mm
Storage
5.6 kWh nominal
Battery type: Lithium ion (LiFePO)
Life cycles: 4,000 cycles to 80% capacity*
*Full charge/discharge at 1C, 25℃
Output Connectors
1x125VAC,20A weatherproof receptacle (NEMA 5-20R)
1x125/250 VAC 20A receptacle (NEMA L14-20R)
2 x 5VDC, 2.4A USB receptacles
User Interface
-Neuron OS enabled wireless monitoring platform for
real-time data, analytics and GPS
-Battery monitor with state of charge, wattage in/out and
operating and charging times
- Surrounding protective handles with room to grip
-Easy to use interface with 1-touch operating feature
Operating Conditions
-Operating temperature (discharging): -20℃ up to 50℃
-Operating temperature (charging): 0℃ up to 50℃
Protection
-Built-in overcharge / over-discharge protection
-Output protected against short circuit, overload, overtemperature and over-voltage
- Master system on/off for storage and shipping
Safety
-UL1973, UL 2271, and IEC 62133 certified battery
-Special inspection SPE1000 CSA
-Recommended storage temperature: 10℃ -30℃ @ 80% SOC
Carbon Offset Equivalent
Offsets 20 kg of CO2e for 8 hours operation*
*Assumes 1/4 load output and low CO2e charging source
Manufactured & Made To Order In North America (4-6 week lead time)
Specifications:
Rated Output
Continuous output: 4,800W
Peak power (3 sec): 5,800W
AC Output
120 VAC pure sine wave (THD <3%)
60Hz, single phase, 40A Max continuous
Charging Ports
AC input: 2 x 125 VAC 20 Amp receptacle (NEMA 5-15P type)
Charging Times (0 to 90% SOC)
1x AC input (120VAC,1,200W): 5 hours
2x2 AC input (120VAC 2,400W): 2.5 hours
Combined input (AC + Solar): 1.5 hours
*Under optimal solar conditions
Box Mechanical Specs
Weight: 330 Ibs /150 kg
Four wheel (two stationary, two swivel) 5" neoprene casters
Dimensions of the unit inclu. handles (L x W x H): 32" x 24"x
30"/ 810mm x 600mm x 750mm
Storage
5.6 kWh nominal
Battery type: Lithium ion (LiFePO)
Life cycles: 4,000 cycles to 80% capacity*
*Full charge/discharge at 1C, 25℃
Output Connectors
1x125VAC,20A weatherproof receptacle (NEMA 5-20R)
1x125/250 VAC 20A receptacle (NEMA L14-20R)
2 x 5VDC, 2.4A USB receptacles
User Interface
-Neuron OS enabled wireless monitoring platform for
real-time data, analytics and GPS
-Battery monitor with state of charge, wattage in/out and
operating and charging times
- Surrounding protective handles with room to grip
-Easy to use interface with 1-touch operating feature
Operating Conditions
-Operating temperature (discharging): -20℃ up to 50℃
-Operating temperature (charging): 0℃ up to 50℃
Protection
-Built-in overcharge / over-discharge protection
-Output protected against short circuit, overload, overtemperature and over-voltage
- Master system on/off for storage and shipping
Safety
-UL1973, UL 2271, and IEC 62133 certified battery
-Special inspection SPE1000 CSA
-Recommended storage temperature: 10℃ -30℃ @ 80% SOC
Carbon Offset Equivalent
Offsets 20 kg of CO2e for 8 hours operation*
*Assumes 1/4 load output and low CO2e charging source
-
Item #:
197148
-
SKU:
TPDN-EVR5K
