Autel IM508S + XP400 Pro + G-BOX2 + TOPDON Chrysler 2018+ Security Gateway Bypass OBDII Cable Automotive Programming Bundle

This Bundle Includes the Following:

• Autel - MaxiIM IM508S - Key Programmer & Diagnostic Tool
• Autel G-BOX2 - Mercedes Benz & BMW Adapter For Autel Key Programmer IM508 / IM608
• Autel Key Programmer - MaxiIM XP400 PRO - EEPROM & ECU for IM508/IM608 (US & Puerto Rico Version)
• TOPDON - Chrysler OBDII Security Gateway Bypass Cable for T-Ninja 1000

Autel - MaxiIM IM508S - Key Programmer & Diagnostic Tool

The IM508S is an Android-based touchscreen diagnostic, service and key programming tablet. This 7-inch Wi-Fi tablet includes the XP200 key programmer, offers immobilizer and key programming capability for most U.S., and Asian vehicles. Use to program Autel's line of IKeys. The IM508S, an all-systems code reader and service tool, offers powerful IMMO functionality including backup, restore, adaptations and coding, key generation and key learning & remote learning.

• MaxiIM IM508S is an ultra fast portable immobilizer and key programming device
• Powerful combination of key programming/all system diagnostics/advanced maintenance services
• Smart Mode for guided and automated key learning
• Expert Mode for advanced key learning
• Read PIN/CS (all key lost), key generation, key learning, remote learning
• IMMO ECU reset/adaptation, refresh/coding
• All systems diagnostics for US, Asian and European vehicles, 1996 and newer
• Advanced maintenance services including EPB, DPF, SAS, Oil reset, and BMS
• Includes 1 Year of Updates

Autel USA Tech Support: 855-288-3587

Autel G-BOX2 - Mercedes Benz & BMW Adapter For IM508/IM608 Key Programmer

Less Time, More Secure!

• Supports fast mode on vehicle and bench when all keys of Mercedes-Benz vehicles using the DAS3 EIS/EZS are lost.
• Reads and writes Bosch engine ECU on F chassis of BMW and MQB of Volkswagen.

The Autel G-BOX2 is an adapter compatible with Autel's IM508 (with Purchase of XP400 programmer) and IM608 Key Programming tablets used to aide in the programming keys for Mercedes DAS3 CAN EIS/EXS in an ALL Keys Lost situation. The G-Box2 also supports DME/DDE ISN Reading and Writing in Boot Mode on applicable BMW vehicles. Bench Method is also supported. All-Keys-Lost password calculations are 4x to 8x faster. Moreover, the number of insertions and removals of W216 and W164 EISs after the year 2009 is reduced to zero, greatly simplifying the operation steps. It can be used in Boot Mode or Bench Method. G-BOX2 needs to be used with the Autel IM508 or IM608 for reliable performance.

1. Mercedes DAS3 add keys and all keys lost on bench. (both)

2. Mercedes DAS3 all keys lost on vehicle. (both)

3. Read engine control module password by boot. (both)

Includes the Following:

• G-Box 2
• DB15 Cable
• Fuse Cable
• Fuse (5A) x2
• Clamp Cable x2
• K-line Cable
• OBDII Extension Cable
• Quick Reference Guide

Autel XP400 PRO Key Programming Adapter For IM508 / IM608

The XP400Pro is a replacement for XP400. It adds more functionality for BMW, Mercedes-Benz, as well as EEPROM reading. With the new protocols, the end-user will be able to read over 2000 (chips, components, devices) types including EEPROM and MCU Read, additional Odometer Read/Write, and more. Also, added functions for EWS3, W209, NEC, and more.

The new XP400Pro supports key renewal on 11 key types with additional adapters - IMKPA, Key Programming Accessories Kit.

Please note: XP400Pro is compatible with IM100 / IM600. The only thing the IM100 and IM600 will not have when used with XP400Pro is the 4 channel Labscope software and AutoAuth.

• Expanded EEPROM functions for more component access
• 170+ types Odometer component reading functions
• 180+ Immobilizer ECU component types
• 40+ Engine ECU component types
• 2000+ MCU component types
• 440+ EEPROM component types
• Compatible with IM508 and IM608
• Includes 1-Year Warranty
• Free Software Updates for Life of Tool

XP400Pro adds support for following chips?

• EEPROM-->>AMD-->>AM29FXXX series chip
• EEPROM-->> FUJITSU-->> MB29FXXX series chip
• EEPROM-->> ST-->> M29FXXX series chip
• Engine control module-->> ST-->> M29FXXX series chip
• IMMO-->> BENZ-->> ESL_W209_W906 (Motorola) read/write/erase function
• IMMO-->> BMW-->>EWS3 module read/write function
• REMOTE_RENEW (renew key)-->> NEC-->> V51 and V5 chip read/write/erase 

XP401 Pro adds support for following adaptor board:

• APB113 PCF79XX adaptor board
• APB114 EWS3 adaptor board
• APB115 NEC adapter board
• APB118 NEC ELV adaptor board
• APB119 TB28FXXX adaptor board
• APB120 TMS370 adaptor board
• APB121 AM29FXXX adapter board
• APB122 AM29FXXX adaptor board1
• APB123 AM29FXXX adaptor board2
• APB126 M35080/D80 adaptor board
• APB127 MC68HC0(7)05BXX adaptor board
• APB128 MC68HC05X32 adaptor board

Click Here To View XP400PRO_IMKPA_Flyer

XP400PRO User Manual

TopDon Chrysler 12+8 Cable For T-Ninja 1000 Key Programmer

• Chrysler 2018+ Secure Gateway Bypass OBDII Cable for the T-Ninja 1000
• Allows programming on newer 2018+ Chrysler Dodge Jeep vehicles

Autel Key Cutting and Programming Machines are made ONLY for use in North America (U.S.A., Canada). Not Caribbean Islands and Caribbean Regions, (Mexico, Guatemala, Belize, El Salvador, Honduras, Nicaragua, Costa Rica, Panama ). They are not intended to be used outside the U.S.A., and Canada, and some models may have region locks on certain software functions and hardware may not be compatible with regional infrastructure. If you intend to purchase this for use outside of the specified regions you do so at your own risk. The manufacturer will refuse the warranty claims and may refuse software support if it is determined being used outside of the designated region.