Features and Benefits:
- Conduct a safety check on OBDII DLC port prior to connecting the scan tool or flashing ECU
- Constantly monitor the battery voltage with warning beeps in the event of weak battery condition
- Warning beep will alert when the voltage falls below 12V or when it rises above 15.2V while programming or coding
- Provides a quick check on the alternator charging condition
- Making voltage/frequency measurement at the pins during diagnosis communication with ECU when the engine will not start
- Detection of protocol and data communication during diagnosis and re-flash on the ECU.
- Colored LED lights display when a protocol is detected, grounds and voltage.
- Obaid Specifications:
- Operating Range: 7.0 ~ 24.0VDC
- Input Maximum Load: Up to 5.0 amps.
- Output Overload Protection
- PTC Fuse Monitoring Voltages: below 12V, higher than 15.2V
- Protocols Detected: PWM(J1850), VPW(J1850), ISO 9141 2, DIS/ISO 14230 4, CANBUS (J 2284) OBDII Connector: 88mm length Downloads View Video
-
Product Type
Programmer
-
Item #:
154465
-
SKU:
AE-OBD AID
